Consideration of plastic deformations in the design of wafer-type compartments

DOI: 10.34759/trd-2022-122-04

Аuthors

Egorov I. A.

e-mail: egorov_ff@rambler.ru

Keywords:

shell, wafer construction, curvature, critical stresses, yield strength, modulus of elasticity, compression diagram

References

1. Danchenko V.G., Shevtsov E.I., Gusev V.V. Kosmicheskaya tekhnika. Raketnoe vooruzhenie, 2017, no. 2 (114), pp. 131-136.

2. Pechnikov V.P., Zakharov R.V., Tarasova A.V. Inzhenernyi zhurnal: nauka i innovatsii, 2017, no. 11, pp. 5.

3. GOST 22350-91. Korpus rakety na zhidkom toplive. Terminy i opredeleniya. (State Standard 22350-91. Liquid fuel rocket body. Terms and definitions.), Moscow, Standarty, 1991, 16 p.

4. Yurtsev E.S. Tekhnologiya mashinostroeniya, 2012, no. 9, pp. 5–8.

5. Zaitsev A.M., Shachnev S.Yu. Opredelenie tekhnologichnosti obehaiki s vafel'noi konstruktsiei. URL: https://ritm-magazine.ru/ru/public/opredelenie-tehnologichnosti-obechayki-s-vafelnoy-konstrukciey

6. Zlenko M.A., Nagaitsev M.V., Dovbysh V.M. Additivnye tekhnologii v mashinostroenii (Additive technologies in mechanical engineering), Moscow, NAMI, 2015, 219 p.

7. Tarasova T.V. Additivnoe proizvodstvo (Additive Manufacturing), Moscow, INFRA-M, 2019, 196 p.

8. Chumakov D.M. Trudy MAI, 2014, no. 78. URL: http://trudymai.ru/eng/published.php?ID=53682

9. Babaitsev A.V., Rabinskii L.N., Min Ya.N. Trudy MAI, 2021, no. 119. URL: http://trudymai.ru/eng/published.php?ID=159788. DOI: 10.34759/trd-2021-119-10

10. Korolev V. Novye materialy i tsifrovizatsiya additivnogo proizvodstva: opyt ILMiT. URL: https://metal3d.ru/upload/Korolev

11. 3D-pechat' metallami. Kharakteristiki i osobennosti materialov. URL: https://3dtoday.ru/blogs/rkgadget/3d-printing-metals-characteristics-and-features-of-materials

12. Uridiya Z.P., Mukhina I.Yu., Duyunova V.A., Kosarina E.I. Trudy VIAM, 2014, no. 12, pp. 4.

13. Chernobrovkin L.S. Raschet startovoi massy i razmerov LA (Calculation of the starting mass and dimensions of the missile), Moscow, Izd-vo MAI, 1989, 78 p.

14. Lizin V.T., Pyatkin V.A. Proektirovanie tonkostennykh konstruktsii (Design of thin-walled structures), Moscow, Mashinostroenie, 1994, 384 p.

15. Egorov I.A. Teplovoe proektirovanie letatel'nykh apparatov. Problemy nagreva letatel'nykh apparatov i sposoby ikh resheniya (Thermal design of missiles. Problems of heating missiles and ways to solve them), Moscow, Izd-vo MAI, 2019, 72 p.

16. Figurovskii V.I. Raschet na prochnost' bespilotnykh letatel'nykh apparatov (Calculation of the strength of missiles), Moscow, Mashinostroenie, 1973, 356 p.

17. Golubev I.S., Samarin A.V. Proektirovanie konstruktsii letatel'nykh apparatov (Missiles Structural Design), Moscow, Mashinostroenie, 1991, 512 p.

18. Golubev I.S., Egorov I.A., Samarin A.V., Turkin I.K. Inzhenernye metody proektirovaniya kryl'ev letatel'nykh apparatov (Engineering methods of missiles wing design), Moscow, Izd-vo MAI, 1988, 80 p.

19. Khertel' G. Tonkostennye konstruktsii (Thin-walled constructions), Moscow, Mashinostroenie, 1965, 528 p.

20. Poroshkovye materialy dlya sistem additivnogo proizvodstva ot kompanii Concept Laser. URL: https://www.concept-laser.ru/materials/

21. Splav magnievyi ML5, ML5 p.ch. vysokoprochnyi. URL: https://inzhener-info.ru/razdely/materialy/magnievye-splavy/litejnye-splavy/splav-magnievyj-ml5-ml5p-ch-vysokoprochnyj.html

Download