Conceptual design of next generation heavy transport aircraft

Design, construction and manufacturing of flying vehicles


Аuthors

Krutov A. A.*, Pigusov E. A.**, Chernavskikh Y. N.***, Chernousov V. I.

Central Aerohydrodynamic Institute named after N.E. Zhukovsky, TsAGI, 1, Zhukovsky str., Zhukovsky, Moscow Region, 140180, Russia

*e-mail: alexander.krutov.90@gmail.com
**e-mail: evgeniy.pigusov@tsagi.ru
***e-mail: urij_ch@mail.ru

Abstract

The lion share of Russian transport aviation profits accrues to transportation of oversized and heavy cargoes by wharf aircraft An-124 and Il-76. The significant share of these cargoes accrues to An-124 due to its higher weight-lift ability and the size of the cargo cabin. The intensive exploitation of An-124 aircraft by the Aerospace Forces of the Russian Federation and civil air cargo carriage will eventually lead to the airframe service life wear-out (even with account for its prolongation). At the same time, the An-124 production recommencement is impossible due to the current geopolitical situation. It is also worth mentioning, that An-124 effectiveness while containers and pallets transportation (constituting the biggest part of freight traffics) is rather low compared to cargo modifications of wide-body passenger aircraft

Thus, there are prerequisites for developing new heavy transport aircraft employing modern achievements in the field of design, aero dynamics, strength, material science, control systems etc.

The perspective heavy transport aircraft should become the adequate replacement of An-214 for Russian military transport aviation, and, at the same time, be attractive to civil cargo airlines, i.e. possess the economy of General cargos transportation, comparable to cargo modifications of passenger aircraft.

The technical concept of the prospective heavy transport aircraft “Elephant” (HTA “Elephant”) meant for carry the wide range of cargoes, including heavy and oversized cargoes, was developed within the framework of Government Contract with the Ministry of Industry and Trade of the Russian Federation in Central Aero-hydrodynamic Institute.

Selection of the major parameters of the aircraft was performed. The draft aerodynamic characteristics and weight reports of the developed arrangement options were determined. Computation of HTA “Elephant” performance and take-off and landing characteristics was performed. The selected geometry and weight parameters ensure transportation of 150 tons of payload at a distance of 7000 km with basing on a runway 3000 m long. With maximum payload of 180 tons, the practical flight range is 4900 km. The takeoff weight limitations while basing on a runway 2500 m long are also determined.

The obtained results will be applied as a ground for the studies continuation of a prospective heavy transport aircraft.

Keywords:

conceptual design, transport aircraft, General cargoes, aerodynamic layout, aircraft performance

References

  1. Dvigatel’ sverkhbol’shoi tyagi PD-35 sozdadut za shest’ let, Aviatransportnoe obozrenie, available at: http://www.ato.ru/content/dvigatel-sverhbolshoy-tyagi-pd-35-sozdadut-za-shest-let/

  2. Zavod “Aviastar” ne budet vozobnovlyat’ proizvodstvo An-124 “Ruslan”, RIA Novosti, available at: https://ria.ru/economy/20160422/1417064828.html

  3. Bolsunovsky A.L., Buzoverya N.P., Karas O.V., Skomorohov S.I. An Experience in Aerodynamic Design of Transport Aircraft. Paper ICAS 2012-2.9.3, 2012, available at: http://www.icas.org/ICAS_ARCHIVE/ICAS2012/PAPERS/479.PDF

  4. Arutyunov A.G., Dydyshko D.V., Endogur A.I., Kuznetsov K.V., Tolmachev V.I. Trudy MAI, 2016, no. 90, available at: http://trudymai.ru/eng/published.php?ID=74704

  5. Smotrova S.A., Naumov S.M., Smotrov A.V. Tekhnologii izgotovleniya silovykh agregatov aviatsionnykh konstruktsii iz polimernykh kompozitsionnykh materialov (Manufacturing technologies of aircraft power units from polymer composite materials), Moscow, TEHNOSFERA, 2015, 216 p.

  6. Torenbeek E. Advanced Aircraft – Conceptual Design, Technology and Optimisation of Subsonic Civil Airplanes. Wiley, Chichester, 2013, 436 p.

  7. Nicolai L., Carichner G. Fundamentals of Aircraft and Airship Design: – Aircraft Design, AIAA Educational Series, Reston, USA, 2010, vol. I, 933 p.

  8. Byushgens G.S. Aerodinamika i dinamika poleta magistral’nykh samoletov (Passenger aircraft aerodynamics and flight dynamics), Moscow-Pekin, Izdatel’skii otdel TsAGI, 1995, 772 p.

  9. Yakubovich N.V. Supergiganty An-124 “Ruslan” i An-225 “Mriya”. “On zhe russkii” (Supergiant aircraftsAn-124 “Ruslan” and An-225 “Mriya”. “It’s Russian!”), Moscow, Eksmo, 2016, 128 p.

  10. Boeing Company. 747-8 Airplane Characteristics for Airport Planning. D6-58326-3. Chikago: Boeing Company, 2012, available at: http://www.boeing.com/assets/pdf/commercial/airports/acaps/747_8.pdf

  11. Barinov V.A. Raschet koeffitsientov soprotivleniya i aerodinamicheskogo kachestva dozvukovykh passazhirskikh i transportnykh samoletov (Drag coefficients and lift-to-drag ratio Estimation of subsonic passenger and transport aircraft), Zhukovskii, Trudy TsAGI, no. 2205, 1983, pp. 3 – 28.

  12. Rukovodstvo po proektirovaniyu aerodromov. Chast’ 3. Pokrytiya. Doc 9157-AN/901 (Aerodrome Design Manual. Part 3. Pavements: Doc 9157-AN/901), IKAO, 1983, 349 p.

  13. Bowers P.M. Unconventional Aircraft. TAB Books, Blue Ridge Summit, PA, USA, 1990, 323 p.

  14. Lange R.H. A Review of Unconventional Aircraft Design Concepts. Paper ICAS-86-2.2.1, 1986, available at: http://www.icas.org/ICAS_ARCHIVE/ICAS1986/ICAS-86-2.2.1.pdf

  15. Liebeck R.H. Design of the Blended Wing Body Subsonic Transport, Journal of Aircraft, 2004, vol. 41, no. 1, pp. 10 – 25.

  16. Hansen L.U., Heinze W., Horst P. Representation of Structural Solutions in Blended Wing Body Preliminary Design. Paper ICAS 2006-1.6.4, 2006, URL: http://icas.org/ICAS_ARCHIVE/ICAS2006/PAPERS/365.PDF

  17. Cho S.H., Bil C., Bayandor J. BWB Military Cargo Transport Fuselage Design and Analysis. Paper ICAS 2008-7.9.3, 2008, available at: http://www.icas.org/ICAS_ARCHIVE/ICAS2008/PAPERS/539.PDF

  18. Hooker J.R., Wick A.T., Hardin C.J. Commercial Cargo Derivative Study of the Advanced Hybrid Wing Body Configuration with Over-Wing Engine Nacelle. NASA-CR-2017-219653. Hampton, NASA Langley Research Center, 2017, available at: https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20170011487.pdf

  19. Krutov A.A. Materialy XXV nauchno-tekhnicheskoi konferentsii po aerodinamike. Zhukovskii, TsAGI, 2014, pp. 167 – 168.

  20. Granovskii Yu. Populyarnaya mekhanika, 2017, no. 5, pp. 38 – 39.

  21. Mikhailov Yu.S., Petrov A.V., Pigusov E.A., Chernousov V.I. Materialy XXIV nauchno-tekhnicheskoi konferentsii po aerodinamike, Zhukovskii, TsAGI, 2013, pp. 183.

  22. Vasil’ev V.V., Lazarev V.V. Trudy MAI, 2017, no. 96, available at: http://trudymai.ru/published.php?ID=85698

  23. Ofitsial’nyi sait proekta aviatsionno-kosmicheskoi sistemy “Stratolaunch”, available at: http://www.stratolaunch.com

  24. Norris G., Wagner M. Airbus A380: superjumbo of the 21st century. Zenith Press, 2010, 160 p.


Download

mai.ru — informational site MAI

Copyright © 2000-2021 by MAI

Вход